The Selfmade CDS\/CDL Set consists of:<\/strong><\/p>\n <\/strong> and<\/span><\/li>\n <\/strong> with 250 ml volume incl. Dosing syringe<\/span><\/li>\n Set of sodium chlorite 25% solution + hydrochloric acid 4% Use with caution and always read the label and product information before use. <\/span><\/p>\n Sodium chlorite solution 25 % <\/strong> :<\/strong><\/p>\n Hazard and safety instructions:<\/span><\/p>\n Always read the label + product information before use.<\/span><\/p>\n Contact with acids liberates very toxic gas. Harmful if swallowed. Causes severe eye irritation. Harmful by inhalation. Do not inhale gas\/mist\/vapour\/aerosol. Keep out of the reach of children.<\/span><\/p>\n Wear protective gloves\/protective clothing, eye\/face protection. Store only in original packaging under lock and key. If swallowed: Call a poison information centre or doctor immediately. In case of contact with eyes: Rinse gently with water for several minutes. Remove contact lenses if possible. Continue rinsing. If medical advice is required, have the identification label ready.<\/span><\/p>\n This mixture does not contain any substances that are assessed as PBT or vPvB.<\/span><\/p>\n hydrochloric adid 4 %: The mixture of sodium chlorite 25% and acid produces chlorine dioxide gas.<\/p>\n with kind execution by Verlag f\u00fcr Gesundheit.<\/p>\n This special bottle can also be used to prepare a solution using the so-called cucumber jar method. However, this is a premium variant. The light-sensitive chlorine dioxide solution is protected in the best possible way<\/strong> by the Miron glass<\/a><\/strong>.<\/p>\n This is your particular advantage when using this Mironglas wide neck bottle. It has a capacity of 1 litre.<\/p>\n The small transparent bottle (100 ml) <\/strong>is supplied as the inner vessel<\/strong>.<\/p>\n The high-quality miron glass protects all substances that decompose faster when light falls. Examples.B include the storage of herbs, as well as creams, but also many other ingredients.<\/p>\n This apothecary bottle is a unique and luxurious MIRON Violet glass bottle. It has been specially developed and acts as an optimal filter against harmful as well as destructive light rays. They are blocked by this particular glass. The protection of the glass ensures, on the one hand, that the taste, as well as the smell, the color, as well as the bioenergy and the corresponding product properties are preserved longer,<\/p>\n Products stored in such Mironglas bottles retain their unique properties. And this even during a longer period. Tests have shown this impressively.<\/p>\n Chlorine dioxide solution according to the cucumber glass method<\/p>\n The mixed solutions are also sensitive to light. And this does not only apply to activation. Therefore, this Miron glass is particularly suitable for this.<\/p>\n A weak point in the so-called “cucumber glass method” was the rubber seal. This seal was attacked by chlorine dioxide.<\/p>\n This bottle on the other hand, is equipped with a cut glass stopper. This has no organic material that could be attacked.<\/p>\n The bottle is almost gas-tight. Overpressurisation cannot occur in the bottle during activation with hydrochloric acid.<\/p>\n A smaller bottle is included as an accessory in which you can activate the sodium chlorite with the hydrochloric acid. After mixing the liquids, place this bottle in the large Mironglas wide-neck bottle. <\/p>\n This wide-necked bottle, miron glass that protects light and frequencies,<\/strong> will first be filled with 700 ml of demineralized water. The water from a After that 30 ml Sodium chlorite solution 25%<\/a><\/strong>and then give 70 ml Hydrochloric acid 4%<\/a><\/strong> in the small bottle. To measure, use the 100 ml measuring cup<\/a><\/strong> included in the set. Be sure to rinse the measuring cup thoroughly before measuring the second component with it so that the two substances are not activated in the measuring cup. <\/p>\n As long as the sodium chlorite and the hydrochloric acid are filled into the small vial, this is immediately placed into the larger wide-necked bottle. The small bottle with the mixture must NOT be closed so that the gas can pass unhindered into the water in the wide-mouth bottle. Immediately close the wide-neck bottle with the large sanded lid by simply placing it on it.<\/p>\n After a waiting period of about 24 hours at room temperature, the gas in the closed bottle passes into the water present inside. By the way, water only absorbs a maximum of 3000 ppm of the gas more permanently. That’s the 0.3%. In other words, exactly what we need. <\/p>\n Only after this activation, carefully place the wide-neck bottle and its contents in the refrigerator. In it, the mixture can cool to below 9 degrees Celsius for about 6 hours. After this time, the chlorine dioxide gas is dissolved in the water in the best possible way and gasses less quickly into the air. The gas liquefies to a large extent below this temperature. Thus, it remains bound in the liquid during the subsequent transfer.<\/p>\n After this time, the cold solution can be unfilled into other containers. To do this, open the Miron glass wide-neck bottle and remove the small bottle. After that, it will close immediately. Then you can transfer the solution (CDS) into smaller bottles. Put the rest back in the fridge. <\/p>\n You can find more Mironglas bottles<\/a><\/strong> to fill here. You can of course also decant the CDL into amber glass bottles<\/a><\/strong> <\/p>\n <\/p>\n This measuring cup is ideal for dosing, measuring and mixing up to 100 ml of volume. <\/strong>, DMSO<\/a><\/strong><\/span> , MKB<\/a>, DMKB<\/a> and many other liquids. Ideal for use in the kitchen as well as in the laboratory. The chemical-resistant, blue scale has a rough scaling in 10 ml steps and also a fine scaling in 2 ml steps. This allows for accurate design. <\/p>\n The Doser-System-bottle can be selected with a removal system. After filling the bottle, a plastic plug, the so-called doser insert<\/a><\/strong>, is pressed firmly into the neck of the bottle with the thumb as far as it will go. The Doser insert, on the other hand, is precisely matched to the doser (dosing syringe). It is the coupling between the Doser insert and the Doser<\/a><\/strong>. The dosing syringe known as “Doser” is suitable for clean and loss-free removal from the glass bottle. The removal is very simple:<\/p>\n 1.<\/strong> Open the bottle. Now you can use the solution.<\/p>\n Thanks to its graduation (scale), you can measure the filling quantity while drawing up the liquid at the same time.<\/p>\n The glass body of the Doser System bottle<\/a><\/strong> PP28 is made of amber glass of hydrolytic class 3. With its through-colouring, it offers your product in the bottle good light protection. The thread has a size of 28 mm (PP28). This bottle is even resistant to acids and other aggressive substances. As a result, it has excellent barrier properties and also has a high-quality appearance. You can also use these very well for filling with CDH3000<\/a><\/strong> .<\/p>\n\n
\n Miron glass wide-neck bottle<\/a>
\n<\/strong> and a polished lid.<\/li>\n
\n sodium chlorite solution 25% and hydrochloric acid 4%,<\/a>
\n<\/strong>each 100 ml.<\/span><\/li>\nThe components at a glance:<\/h1>\n
\nSet of sodium chlorite 25 % + hydrochloric acid 4 %<\/h3>\n
![\"\"](\"https:\/\/shop.nlq24.eu\/wp-content\/uploads\/2019\/01\/Achtung-Ausrufezeichen-71x71-1.jpg\")
<\/strong>
\nAttention <\/strong><\/p>\n
\n
\n<\/strong>
\nAtention
\n<\/strong><\/span>May be corrosive to metals. Causes skin irritation. Causes severe eye irritation. In case of contact with eyes: Rinse gently with water for several minutes. Remove existing contact lenses if possible. Continue rinsing. If swallowed: Rinse mouth. Do not induce vomiting. Wear protective gloves\/protective clothing\/eye protection\/face protection.<\/p>\n
\nInfo about the contents of the set<\/h3>\n
The Mironglas wide-neck bottle<\/h3>\n
Miron glass wide-neck bottle for longer shelf life<\/h3>\n
Activation according to the cucumber jar method Deluxe<\/h3>\n
\n reverse osmosis system<\/strong>
\n<\/a>is best suited for this. There are two models in the shop,<\/p>\nActivation<\/h3>\n
Further processing of the solution<\/h3>\n
\nThe measuring cup 100 ml<\/strong><\/h3>\n
\nIt is made of durable PP<\/strong> and is therefore almost unbreakable.<\/strong> The material is highly transparent and provides a good insight into the filling material. Thus, a quality visual inspection during filling is very well possible. This measuring cup has a smooth surface and is universally usable. Due to its durability.B, it is also suitable for CDH3000<\/a><\/p>\n
\nThis cup is also suitable for hot disinfection up to max. 121 \u00b0C for up to 20 minutes and therefore autoclavable.<\/p>\nThe measurements:<\/strong>
\nThe diameter in the upper edge area is 50 mm, in the lower 40 mm. The height is 80 mm.<\/h4>\n
\nThe Doser-System bottle 250 ml<\/strong><\/h3>\n
\n2<\/strong>. Insert the doser<\/a> <\/strong>(dosing syringe) firmly into the doser insert<\/a><\/strong> (coupling).
\n3.<\/strong> Now tilt the bottle upside down.
\n4.<\/b> Use the doser to take out the amount you need and turn the bottle upside down again.
\n5.<\/strong> Close the bottle again immediately.<\/p>\nTechnical data of the Doser System bottle PP28:<\/strong><\/h4>\n