CDH3000 is the ready-to-use chlorine dioxide solution against bacteria, viruses, fungi and microorganisms. With this chlorine dioxide you reliably dissolve biofilms. Biofilms are the refuge of germs. No toxic residues remain after disinfection and cleaning. With CDH3000 you can reliably disinfect your drinking water. Only clean water is good drinking water :-).
CDH3000 has a chlorine dioxide content of < 0.3 %. It is chlorine dioxide gas in aqueous solution. It is measured in milliliters. Anyone who wants to use CDH and has worked with the chlorine dioxide set before should know this. CDH3000 is already activated in water.
1 ml CDH3000 corresponds to approx. 1 activated drop from the conventional chlorine dioxide set (sodium chlorite + hydrochloric acid). It can also be used for the production of chlorine dioxide. However, you must activate it yourself. This is no longer necessary with CDH.
There are different variants of CDH3000
What are the differences?
1. the ready solution CDH3000 (activated)
2. the ready solution CDH3000 Premium (activated) and longer durable in the Miron glass bottle
3. the CDH3000 LONG (inactive) with activator. It is only activated when required and can be kept for up to 5 years until then.
Activated CDH3000 is freshly, lovingly and carefully prepared for you according to the original stoichimetric formula. The activation takes place loss-free in the closed glass bottle in distilled water. The components sodium chlorite 25% solution and 4% hydrochloric acid solution are used. Activation is carried out with reduced acidity. Thus there is no excessive excess acid in the solution. The bottle is provided with the activation date. This allows you to better estimate the probable shelf life. You can also see how fresh your CDH3000 solution is.
My TIP: To be able to remove the CDH3000, you need a doser for the 250 and 500 ml bottles. The Doser is a kind of dosing syringe that fits exactly into the smaller opening of the bottle. This reduction of the bottle neck is realized with the Doser insert. This is pressed into the bottle neck. The Doser, again, then fits exactly into this insert. This enables loss-free removal. Thus, when CDH3000 is removed, almost no chlorine dioxide gas is released from the bottle. Thus you use the whole power, because no gas evaporates in the room.
The Doser, on the other hand, has a graduation in 0.5 ml steps. This allows you to measure the correct quantity simultaneously during the extraction process. So everything in one step. Therefore I recommend the purchase of the doser for each CDH bottle with 250 ml and 500 ml. You can select on the product whether you want to order a Doser at the same time.
Storage: To keep the effect of the chlorine dioxide mixture longer, store it cool and protected from light. Storage below 11°C in front of the opening is recommended if you want to use CDH3000 without a CDH doser. Under this temperature, the chlorine dioxide gas liquefies and then does not evaporate so quickly in the room air. Other terms for a chlorine dioxide solution, such as CDH (chlorine dioxide durable) are: CDS (chlorine dioxide solution), CDL (chlorine dioxide solution). All this is chlorine dioxide in aqueous solution. With CDL/CDS, only the activated chlorine dioxide gas was introduced into water. With CDH, the sodium chlorite is mixed with the hydrochloric acid in water and then activated in the closed bottle.
1 ml CDH3000 is sufficient for disinfecting 1 litre of drinking water.
For heavily contaminated water, up to 6 ml per litre of water can be used. Simply add the desired quantity of your CDH3000 to the water to be disinfected. After a few minutes you can use the disinfected water as drinking water.
*** Translated with www.DeepL.com/Translator (free version) ***