Reverse osmosis system Smart Premium
Small, space-saving and inexpensive Reverse osmosis plant Smartline Gold premium
The cheap entry-level model for your pure water anywhere. Nevertheless it has a 3 litre tank and a water tap. This is not standard for very small systems.
This reverse osmosis unit Smartline Gold premium is easy to transport. So you can use these also on the way on journeys. The conveying capacity is up to 285 litres in 24 hours. The system works with a 3 liter storage tank and does not require an electrical connection. This is possible by using the pressure of the tap water. Water cleaning without electricity – only 3 bar line pressure is required.
Reverse osmosis system Smart Premium – a space wonder
With a suspension device and 4 rubber feet, this inexpensive unit can be mounted on the wall or in the base cabinet. This plant has no large pre-filters. This saves space. Due to the lack of pre-filters, you must therefore change the filters a little more frequently. However, the price for this required filter set for this system is correspondingly low.
The system filters coliform germs, bacteria, herbicides, phosphates, heavy metals, fungicides, nitrate, nitrite, pharmaceutical residues or simply lime up to 100% from the tap water.
Experience the purest taste of the purest water. In addition, this plant is already equipped with an energization cartridge that energizes the water.
The filter capacity per day is up to 285 litres.
The ratio of reverse osmosis water to waste water is 1 to 4.
Small and handy with the following dimensions: 35.5 cm x 13.5 cm x 12 cm (L x W x H)
The 3 litre storage tank requires only the following small space: 24.5 x 24.5 x 34.3 cm (L x W x H)
The weight of the system itself is only 4.8 kg.
Maintenance and care
When changing the membrane I recommend a disinfection after the rough pre-cleaning of the housing from the membrane.
To do this, use
. Shut off the water supply beforehand. Unscrew the membrane housing and drain the water. To do this, simply add 1-2 ml of CDH3000 to the membrane housing (with the old membrane inside). Close the housing again and start up the system so that water runs into the system. Remove 2 liters of water from the UO tap. Then let the plant rest for about half an hour. Chlorine dioxide flows through the membrane as well as the tank and faucet, thereby disinfecting them.
Then they open the diaphragm housing and replace the old diaphragm with the new one. Connect everything again.
Scope of Package:
This reverse osmosis water filter consists of:
the 3 liter storage tank, a sediment filter 5 micron,
an activated carbon filter,
a TFC high performance membrane 100 GPD,
1 x connection set for mounting on a water tap connection,
all hose lines and a key for membrane housing and a ceramic faucet.
If you want a stainless steel faucet, you can order it separately.
You can find illustrated connection instructions here:
Instruction Manual Smart Premium Reverse Osmosis System