Reverse osmosis system Smart Premium

Technical data:

The filter capacity per day is up to 285 litres.
The ratio of reverse osmosis water to waste water is 1 to 4.
Small and handy with the following dimensions: 35.5 cm x 13.5 cm x 12 cm (L x W x H)
The 3 litre storage tank requires only the following small space: 24.5 x 24.5 x 34.3 cm (L x W x H)
The weight of the system itself is only 4.8 kg.

Maintenance and care

It is recommended to change the filter every 5 months as this system does not have any coarse pre-filters. Buy this filter set for your system. The membrane must be changed every 24 months.

When changing the membrane I recommend a disinfection after the rough pre-cleaning of the housing from the membrane.

To do this, use

CDH3000

. Shut off the water supply beforehand. Unscrew the membrane housing and drain the water. To do this, simply add 1-2 ml of CDH3000 to the membrane housing (with the old membrane inside). Close the housing again and start up the system so that water runs into the system. Remove 2 liters of water from the UO tap. Then let the plant rest for about half an hour. Chlorine dioxide flows through the membrane as well as the tank and faucet, thereby disinfecting them.

Then they open the diaphragm housing and replace the old diaphragm with the new one. Connect everything again.

Scope of Package:

This reverse osmosis water filter consists of:
the 3 liter storage tank, a sediment filter 5 micron,
an activated carbon filter,
a TFC high performance membrane 100 GPD,
1 x connection set for mounting on a water tap connection,
all hose lines and a key for membrane housing and a ceramic faucet.

If you want a stainless steel faucet, you can order it separately.

You can find illustrated connection instructions here:
Instruction Manual Smart Premium Reverse Osmosis System

This post is also available in: Deutsch (German) English Español (Spanish)